dmesg - Intel Core i7-2600K
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.10.0-693.21.1.el7.x86_64 (builder@kbuilder.dev.centos.org) (gcc version 4.8.5 20150623 (Red Hat 4.8.5-16) (GCC) ) #1 SMP Wed Mar 7 19:03:37 UTC 2018
Command line: BOOT_IMAGE=/vmlinuz-3.10.0-693.21.1.el7.x86_64 root=/dev/mapper/vg01-lv_root ro rd.lvm.lv=vg01/lv_usr rd.lvm.lv=vg01/lv_swap vconsole.font=latarcyrheb-sun16 rd.lvm.lv=vg01/lv_root vconsole.keymap=de rhgb quiet LANG=en_US.utf8
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000dd30afff] usable
BIOS-e820: [mem 0x00000000dd30b000-0x00000000dd889fff] reserved
BIOS-e820: [mem 0x00000000dd88a000-0x00000000dd915fff] usable
BIOS-e820: [mem 0x00000000dd916000-0x00000000dd9b8fff] ACPI NVS
BIOS-e820: [mem 0x00000000dd9b9000-0x00000000dedc6fff] reserved
BIOS-e820: [mem 0x00000000dedc7000-0x00000000dedc7fff] usable
BIOS-e820: [mem 0x00000000dedc8000-0x00000000dee0afff] ACPI NVS
BIOS-e820: [mem 0x00000000dee0b000-0x00000000df232fff] usable
BIOS-e820: [mem 0x00000000df233000-0x00000000df7f3fff] reserved
BIOS-e820: [mem 0x00000000df7f4000-0x00000000df7fffff] usable
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000081effffff] usable
NX (Execute Disable) protection: active
e820: update [mem 0x96e7c018-0x96e9a057] usable ==> usable
e820: update [mem 0x96e6f018-0x96e7b857] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x000000000009efff] usable
reserve setup_data: [mem 0x000000000009f000-0x000000000009ffff] reserved
reserve setup_data: [mem 0x0000000000100000-0x0000000096e6f017] usable
reserve setup_data: [mem 0x0000000096e6f018-0x0000000096e7b857] usable
reserve setup_data: [mem 0x0000000096e7b858-0x0000000096e7c017] usable
reserve setup_data: [mem 0x0000000096e7c018-0x0000000096e9a057] usable
reserve setup_data: [mem 0x0000000096e9a058-0x00000000dd30afff] usable
reserve setup_data: [mem 0x00000000dd30b000-0x00000000dd889fff] reserved
reserve setup_data: [mem 0x00000000dd88a000-0x00000000dd915fff] usable
reserve setup_data: [mem 0x00000000dd916000-0x00000000dd9b8fff] ACPI NVS
reserve setup_data: [mem 0x00000000dd9b9000-0x00000000dedc6fff] reserved
reserve setup_data: [mem 0x00000000dedc7000-0x00000000dedc7fff] usable
reserve setup_data: [mem 0x00000000dedc8000-0x00000000dee0afff] ACPI NVS
reserve setup_data: [mem 0x00000000dee0b000-0x00000000df232fff] usable
reserve setup_data: [mem 0x00000000df233000-0x00000000df7f3fff] reserved
reserve setup_data: [mem 0x00000000df7f4000-0x00000000df7fffff] usable
reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
reserve setup_data: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x000000081effffff] usable
efi: EFI v2.31 by American Megatrends
efi: ACPI=0xdd9a9000 ACPI 2.0=0xdd9a9000 SMBIOS=0xf04c0 MPS=0xfd470
efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000008000) (0MB)
efi: mem01: type=2, attr=0xf, range=[0x0000000000008000-0x0000000000009000) (0MB)
efi: mem02: type=7, attr=0xf, range=[0x0000000000009000-0x000000000005e000) (0MB)
efi: mem03: type=4, attr=0xf, range=[0x000000000005e000-0x0000000000060000) (0MB)
efi: mem04: type=3, attr=0xf, range=[0x0000000000060000-0x000000000009f000) (0MB)
efi: mem05: type=6, attr=0x800000000000000f, range=[0x000000000009f000-0x00000000000a0000) (0MB)
efi: mem06: type=7, attr=0xf, range=[0x0000000000100000-0x0000000001000000) (15MB)
efi: mem07: type=2, attr=0xf, range=[0x0000000001000000-0x0000000002100000) (17MB)
efi: mem08: type=7, attr=0xf, range=[0x0000000002100000-0x0000000002200000) (1MB)
efi: mem09: type=2, attr=0xf, range=[0x0000000002200000-0x0000000003629000) (20MB)
efi: mem10: type=7, attr=0xf, range=[0x0000000003629000-0x000000003cb78000) (917MB)
efi: mem11: type=2, attr=0xf, range=[0x000000003cb78000-0x0000000040000000) (52MB)
efi: mem12: type=7, attr=0xf, range=[0x0000000040000000-0x0000000096e6f000) (1390MB)
efi: mem13: type=2, attr=0xf, range=[0x0000000096e6f000-0x00000000cacd9000) (830MB)
efi: mem14: type=7, attr=0xf, range=[0x00000000cacd9000-0x00000000cacdc000) (0MB)
efi: mem15: type=2, attr=0xf, range=[0x00000000cacdc000-0x00000000caee4000) (2MB)
efi: mem16: type=1, attr=0xf, range=[0x00000000caee4000-0x00000000cb00b000) (1MB)
efi: mem17: type=7, attr=0xf, range=[0x00000000cb00b000-0x00000000cf470000) (68MB)
efi: mem18: type=4, attr=0xf, range=[0x00000000cf470000-0x00000000cf4d3000) (0MB)
efi: mem19: type=7, attr=0xf, range=[0x00000000cf4d3000-0x00000000cf504000) (0MB)
efi: mem20: type=4, attr=0xf, range=[0x00000000cf504000-0x00000000cf51c000) (0MB)
efi: mem21: type=7, attr=0xf, range=[0x00000000cf51c000-0x00000000cf526000) (0MB)
efi: mem22: type=4, attr=0xf, range=[0x00000000cf526000-0x00000000cf53d000) (0MB)
efi: mem23: type=7, attr=0xf, range=[0x00000000cf53d000-0x00000000cf547000) (0MB)
efi: mem24: type=4, attr=0xf, range=[0x00000000cf547000-0x00000000cf560000) (0MB)
efi: mem25: type=7, attr=0xf, range=[0x00000000cf560000-0x00000000cf569000) (0MB)
efi: mem26: type=4, attr=0xf, range=[0x00000000cf569000-0x00000000cf587000) (0MB)
efi: mem27: type=7, attr=0xf, range=[0x00000000cf587000-0x00000000cf591000) (0MB)
efi: mem28: type=4, attr=0xf, range=[0x00000000cf591000-0x00000000cf5b1000) (0MB)
efi: mem29: type=7, attr=0xf, range=[0x00000000cf5b1000-0x00000000cf5bc000) (0MB)
efi: mem30: type=4, attr=0xf, range=[0x00000000cf5bc000-0x00000000cf5db000) (0MB)
efi: mem31: type=7, attr=0xf, range=[0x00000000cf5db000-0x00000000cf5e7000) (0MB)
efi: mem32: type=4, attr=0xf, range=[0x00000000cf5e7000-0x00000000cf605000) (0MB)
efi: mem33: type=7, attr=0xf, range=[0x00000000cf605000-0x00000000cf60f000) (0MB)
efi: mem34: type=4, attr=0xf, range=[0x00000000cf60f000-0x00000000cf62b000) (0MB)
efi: mem35: type=7, attr=0xf, range=[0x00000000cf62b000-0x00000000cf630000) (0MB)
efi: mem36: type=4, attr=0xf, range=[0x00000000cf630000-0x00000000cf652000) (0MB)
efi: mem37: type=7, attr=0xf, range=[0x00000000cf652000-0x00000000cf65e000) (0MB)
efi: mem38: type=4, attr=0xf, range=[0x00000000cf65e000-0x00000000cf67f000) (0MB)
efi: mem39: type=7, attr=0xf, range=[0x00000000cf67f000-0x00000000cf68b000) (0MB)
efi: mem40: type=4, attr=0xf, range=[0x00000000cf68b000-0x00000000cf6ac000) (0MB)
efi: mem41: type=7, attr=0xf, range=[0x00000000cf6ac000-0x00000000cf6b9000) (0MB)
efi: mem42: type=4, attr=0xf, range=[0x00000000cf6b9000-0x00000000cf716000) (0MB)
efi: mem43: type=7, attr=0xf, range=[0x00000000cf716000-0x00000000cf71d000) (0MB)
efi: mem44: type=4, attr=0xf, range=[0x00000000cf71d000-0x00000000cf738000) (0MB)
efi: mem45: type=7, attr=0xf, range=[0x00000000cf738000-0x00000000cf73e000) (0MB)
efi: mem46: type=4, attr=0xf, range=[0x00000000cf73e000-0x00000000cf75e000) (0MB)
efi: mem47: type=7, attr=0xf, range=[0x00000000cf75e000-0x00000000cf76a000) (0MB)
efi: mem48: type=4, attr=0xf, range=[0x00000000cf76a000-0x00000000cf78c000) (0MB)
efi: mem49: type=7, attr=0xf, range=[0x00000000cf78c000-0x00000000cf798000) (0MB)
efi: mem50: type=4, attr=0xf, range=[0x00000000cf798000-0x00000000cf7b2000) (0MB)
efi: mem51: type=7, attr=0xf, range=[0x00000000cf7b2000-0x00000000cf7b7000) (0MB)
efi: mem52: type=4, attr=0xf, range=[0x00000000cf7b7000-0x00000000cf7cc000) (0MB)
efi: mem53: type=7, attr=0xf, range=[0x00000000cf7cc000-0x00000000cf7d7000) (0MB)
efi: mem54: type=4, attr=0xf, range=[0x00000000cf7d7000-0x00000000cf7fe000) (0MB)
efi: mem55: type=7, attr=0xf, range=[0x00000000cf7fe000-0x00000000cf84d000) (0MB)
efi: mem56: type=4, attr=0xf, range=[0x00000000cf84d000-0x00000000cf8ea000) (0MB)
efi: mem57: type=7, attr=0xf, range=[0x00000000cf8ea000-0x00000000cf8f4000) (0MB)
efi: mem58: type=4, attr=0xf, range=[0x00000000cf8f4000-0x00000000cf90d000) (0MB)
efi: mem59: type=7, attr=0xf, range=[0x00000000cf90d000-0x00000000cf917000) (0MB)
efi: mem60: type=4, attr=0xf, range=[0x00000000cf917000-0x00000000cf92f000) (0MB)
efi: mem61: type=7, attr=0xf, range=[0x00000000cf92f000-0x00000000cf938000) (0MB)
efi: mem62: type=4, attr=0xf, range=[0x00000000cf938000-0x00000000cf955000) (0MB)
efi: mem63: type=7, attr=0xf, range=[0x00000000cf955000-0x00000000cf95f000) (0MB)
efi: mem64: type=4, attr=0xf, range=[0x00000000cf95f000-0x00000000cf97f000) (0MB)
efi: mem65: type=7, attr=0xf, range=[0x00000000cf97f000-0x00000000cf98a000) (0MB)
efi: mem66: type=4, attr=0xf, range=[0x00000000cf98a000-0x00000000cf9ab000) (0MB)
efi: mem67: type=7, attr=0xf, range=[0x00000000cf9ab000-0x00000000cf9b7000) (0MB)
efi: mem68: type=4, attr=0xf, range=[0x00000000cf9b7000-0x00000000cf9d5000) (0MB)
efi: mem69: type=7, attr=0xf, range=[0x00000000cf9d5000-0x00000000cf9df000) (0MB)
efi: mem70: type=4, attr=0xf, range=[0x00000000cf9df000-0x00000000cf9f9000) (0MB)
efi: mem71: type=7, attr=0xf, range=[0x00000000cf9f9000-0x00000000cf9fe000) (0MB)
efi: mem72: type=4, attr=0xf, range=[0x00000000cf9fe000-0x00000000cfa20000) (0MB)
efi: mem73: type=7, attr=0xf, range=[0x00000000cfa20000-0x00000000cfa2c000) (0MB)
efi: mem74: type=4, attr=0xf, range=[0x00000000cfa2c000-0x00000000cfae4000) (0MB)
efi: mem75: type=7, attr=0xf, range=[0x00000000cfae4000-0x00000000cfaeb000) (0MB)
efi: mem76: type=4, attr=0xf, range=[0x00000000cfaeb000-0x00000000cfb06000) (0MB)
efi: mem77: type=7, attr=0xf, range=[0x00000000cfb06000-0x00000000cfb0c000) (0MB)
efi: mem78: type=4, attr=0xf, range=[0x00000000cfb0c000-0x00000000cfb80000) (0MB)
efi: mem79: type=7, attr=0xf, range=[0x00000000cfb80000-0x00000000cfb85000) (0MB)
efi: mem80: type=4, attr=0xf, range=[0x00000000cfb85000-0x00000000cfb9c000) (0MB)
efi: mem81: type=7, attr=0xf, range=[0x00000000cfb9c000-0x00000000cfba7000) (0MB)
efi: mem82: type=4, attr=0xf, range=[0x00000000cfba7000-0x00000000cfc81000) (0MB)
efi: mem83: type=7, attr=0xf, range=[0x00000000cfc81000-0x00000000cfc83000) (0MB)
efi: mem84: type=4, attr=0xf, range=[0x00000000cfc83000-0x00000000cfcb8000) (0MB)
efi: mem85: type=7, attr=0xf, range=[0x00000000cfcb8000-0x00000000cfcc2000) (0MB)
efi: mem86: type=4, attr=0xf, range=[0x00000000cfcc2000-0x00000000cfcdb000) (0MB)
efi: mem87: type=7, attr=0xf, range=[0x00000000cfcdb000-0x00000000cfce5000) (0MB)
efi: mem88: type=4, attr=0xf, range=[0x00000000cfce5000-0x00000000cfcfd000) (0MB)
efi: mem89: type=7, attr=0xf, range=[0x00000000cfcfd000-0x00000000cfd06000) (0MB)
efi: mem90: type=4, attr=0xf, range=[0x00000000cfd06000-0x00000000cfd4d000) (0MB)
efi: mem91: type=7, attr=0xf, range=[0x00000000cfd4d000-0x00000000cfd4e000) (0MB)
efi: mem92: type=4, attr=0xf, range=[0x00000000cfd4e000-0x00000000cfdc9000) (0MB)
efi: mem93: type=7, attr=0xf, range=[0x00000000cfdc9000-0x00000000cfdce000) (0MB)
efi: mem94: type=4, attr=0xf, range=[0x00000000cfdce000-0x00000000cfeb1000) (0MB)
efi: mem95: type=7, attr=0xf, range=[0x00000000cfeb1000-0x00000000cfeb8000) (0MB)
efi: mem96: type=4, attr=0xf, range=[0x00000000cfeb8000-0x00000000cfed4000) (0MB)
efi: mem97: type=7, attr=0xf, range=[0x00000000cfed4000-0x00000000cfeda000) (0MB)
efi: mem98: type=4, attr=0xf, range=[0x00000000cfeda000-0x00000000cff4e000) (0MB)
efi: mem99: type=7, attr=0xf, range=[0x00000000cff4e000-0x00000000cff53000) (0MB)
efi: mem100: type=4, attr=0xf, range=[0x00000000cff53000-0x00000000cff6c000) (0MB)
efi: mem101: type=7, attr=0xf, range=[0x00000000cff6c000-0x00000000cff6d000) (0MB)
efi: mem102: type=4, attr=0xf, range=[0x00000000cff6d000-0x00000000d0100000) (1MB)
efi: mem103: type=7, attr=0xf, range=[0x00000000d0100000-0x00000000d0103000) (0MB)
efi: mem104: type=4, attr=0xf, range=[0x00000000d0103000-0x00000000d014f000) (0MB)
efi: mem105: type=7, attr=0xf, range=[0x00000000d014f000-0x00000000d0150000) (0MB)
efi: mem106: type=4, attr=0xf, range=[0x00000000d0150000-0x00000000d01ca000) (0MB)
efi: mem107: type=7, attr=0xf, range=[0x00000000d01ca000-0x00000000d01cf000) (0MB)
efi: mem108: type=4, attr=0xf, range=[0x00000000d01cf000-0x00000000d024c000) (0MB)
efi: mem109: type=7, attr=0xf, range=[0x00000000d024c000-0x00000000d024f000) (0MB)
efi: mem110: type=4, attr=0xf, range=[0x00000000d024f000-0x00000000d02b5000) (0MB)
efi: mem111: type=7, attr=0xf, range=[0x00000000d02b5000-0x00000000d02bc000) (0MB)
efi: mem112: type=4, attr=0xf, range=[0x00000000d02bc000-0x00000000d02d8000) (0MB)
efi: mem113: type=7, attr=0xf, range=[0x00000000d02d8000-0x00000000d02de000) (0MB)
efi: mem114: type=4, attr=0xf, range=[0x00000000d02de000-0x00000000d0424000) (1MB)
efi: mem115: type=7, attr=0xf, range=[0x00000000d0424000-0x00000000d0425000) (0MB)
efi: mem116: type=4, attr=0xf, range=[0x00000000d0425000-0x00000000d052c000) (1MB)
efi: mem117: type=7, attr=0xf, range=[0x00000000d052c000-0x00000000d052f000) (0MB)
efi: mem118: type=4, attr=0xf, range=[0x00000000d052f000-0x00000000d057c000) (0MB)
efi: mem119: type=7, attr=0xf, range=[0x00000000d057c000-0x00000000d057d000) (0MB)
efi: mem120: type=4, attr=0xf, range=[0x00000000d057d000-0x00000000d079a000) (2MB)
efi: mem121: type=7, attr=0xf, range=[0x00000000d079a000-0x00000000d079e000) (0MB)
efi: mem122: type=4, attr=0xf, range=[0x00000000d079e000-0x00000000d0943000) (1MB)
efi: mem123: type=7, attr=0xf, range=[0x00000000d0943000-0x00000000d0944000) (0MB)
efi: mem124: type=4, attr=0xf, range=[0x00000000d0944000-0x00000000d0a9e000) (1MB)
efi: mem125: type=7, attr=0xf, range=[0x00000000d0a9e000-0x00000000d0a9f000) (0MB)
efi: mem126: type=4, attr=0xf, range=[0x00000000d0a9f000-0x00000000d0acb000) (0MB)
efi: mem127: type=7, attr=0xf, range=[0x00000000d0acb000-0x00000000d0acc000) (0MB)
efi: mem128: type=4, attr=0xf, range=[0x00000000d0acc000-0x00000000d0b44000) (0MB)
efi: mem129: type=7, attr=0xf, range=[0x00000000d0b44000-0x00000000d0b45000) (0MB)
efi: mem130: type=4, attr=0xf, range=[0x00000000d0b45000-0x00000000d0bcd000) (0MB)
efi: mem131: type=7, attr=0xf, range=[0x00000000d0bcd000-0x00000000d0bce000) (0MB)
efi: mem132: type=4, attr=0xf, range=[0x00000000d0bce000-0x00000000d0c6e000) (0MB)
efi: mem133: type=7, attr=0xf, range=[0x00000000d0c6e000-0x00000000d0c70000) (0MB)
efi: mem134: type=4, attr=0xf, range=[0x00000000d0c70000-0x00000000d0d23000) (0MB)
efi: mem135: type=7, attr=0xf, range=[0x00000000d0d23000-0x00000000d0d24000) (0MB)
efi: mem136: type=4, attr=0xf, range=[0x00000000d0d24000-0x00000000d0e37000) (1MB)
efi: mem137: type=7, attr=0xf, range=[0x00000000d0e37000-0x00000000d0e3e000) (0MB)
efi: mem138: type=4, attr=0xf, range=[0x00000000d0e3e000-0x00000000d13d8000) (5MB)
efi: mem139: type=7, attr=0xf, range=[0x00000000d13d8000-0x00000000d15ac000) (1MB)
efi: mem140: type=4, attr=0xf, range=[0x00000000d15ac000-0x00000000dc780000) (177MB)
efi: mem141: type=7, attr=0xf, range=[0x00000000dc780000-0x00000000dccd2000) (5MB)
efi: mem142: type=3, attr=0xf, range=[0x00000000dccd2000-0x00000000dd30b000) (6MB)
efi: mem143: type=0, attr=0xf, range=[0x00000000dd30b000-0x00000000dd80e000) (5MB)
efi: mem144: type=0, attr=0xf, range=[0x00000000dd80e000-0x00000000dd81f000) (0MB)
efi: mem145: type=0, attr=0xf, range=[0x00000000dd81f000-0x00000000dd82e000) (0MB)
efi: mem146: type=0, attr=0xf, range=[0x00000000dd82e000-0x00000000dd830000) (0MB)
efi: mem147: type=0, attr=0xf, range=[0x00000000dd830000-0x00000000dd837000) (0MB)
efi: mem148: type=0, attr=0xf, range=[0x00000000dd837000-0x00000000dd88a000) (0MB)
efi: mem149: type=7, attr=0xf, range=[0x00000000dd88a000-0x00000000dd916000) (0MB)
efi: mem150: type=10, attr=0xf, range=[0x00000000dd916000-0x00000000dd9b9000) (0MB)
efi: mem151: type=6, attr=0x800000000000000f, range=[0x00000000dd9b9000-0x00000000de560000) (11MB)
efi: mem152: type=6, attr=0x800000000000000f, range=[0x00000000de560000-0x00000000deb61000) (6MB)
efi: mem153: type=6, attr=0x800000000000000f, range=[0x00000000deb61000-0x00000000deb63000) (0MB)
efi: mem154: type=6, attr=0x800000000000000f, range=[0x00000000deb63000-0x00000000deccb000) (1MB)
efi: mem155: type=6, attr=0x800000000000000f, range=[0x00000000deccb000-0x00000000deccd000) (0MB)
efi: mem156: type=6, attr=0x800000000000000f, range=[0x00000000deccd000-0x00000000ded49000) (0MB)
efi: mem157: type=5, attr=0x800000000000000f, range=[0x00000000ded49000-0x00000000ded62000) (0MB)
efi: mem158: type=5, attr=0x800000000000000f, range=[0x00000000ded62000-0x00000000dedc7000) (0MB)
efi: mem159: type=4, attr=0xf, range=[0x00000000dedc7000-0x00000000dedc8000) (0MB)
efi: mem160: type=10, attr=0xf, range=[0x00000000dedc8000-0x00000000dee0b000) (0MB)
efi: mem161: type=4, attr=0xf, range=[0x00000000dee0b000-0x00000000def5d000) (1MB)
efi: mem162: type=3, attr=0xf, range=[0x00000000def5d000-0x00000000df203000) (2MB)
efi: mem163: type=4, attr=0xf, range=[0x00000000df203000-0x00000000df209000) (0MB)
efi: mem164: type=3, attr=0xf, range=[0x00000000df209000-0x00000000df20d000) (0MB)
efi: mem165: type=4, attr=0xf, range=[0x00000000df20d000-0x00000000df21a000) (0MB)
efi: mem166: type=3, attr=0xf, range=[0x00000000df21a000-0x00000000df22c000) (0MB)
efi: mem167: type=4, attr=0xf, range=[0x00000000df22c000-0x00000000df233000) (0MB)
efi: mem168: type=6, attr=0x800000000000000f, range=[0x00000000df233000-0x00000000df7f4000) (5MB)
efi: mem169: type=4, attr=0xf, range=[0x00000000df7f4000-0x00000000df800000) (0MB)
efi: mem170: type=7, attr=0xf, range=[0x0000000100000000-0x000000081f000000) (29168MB)
efi: mem171: type=11, attr=0x8000000000000001, range=[0x00000000f8000000-0x00000000fc000000) (64MB)
efi: mem172: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
efi: mem173: type=11, attr=0x8000000000000001, range=[0x00000000fed00000-0x00000000fed04000) (0MB)
efi: mem174: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
efi: mem175: type=11, attr=0x8000000000000001, range=[0x00000000fee00000-0x00000000fee01000) (0MB)
efi: mem176: type=11, attr=0x8000000000000001, range=[0x00000000ff000000-0x0000000100000000) (16MB)
SMBIOS 2.7 present.
DMI: MSI MS-7758/Z77A-G43 (MS-7758), BIOS V2.13 03/07/2014
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x81f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-D3FFF write-protect
D4000-DFFFF uncachable
E0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask 800000000 write-back
1 base 800000000 mask FF0000000 write-back
2 base 810000000 mask FF8000000 write-back
3 base 818000000 mask FFC000000 write-back
4 base 81C000000 mask FFE000000 write-back
5 base 81E000000 mask FFF000000 write-back
6 base 0E0000000 mask FE0000000 uncachable
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 32GB, type WB
reg 1, base: 32GB, range: 256MB, type WB
reg 2, base: 33024MB, range: 128MB, type WB
reg 3, base: 33152MB, range: 64MB, type WB
reg 4, base: 33216MB, range: 32MB, type WB
reg 5, base: 33248MB, range: 16MB, type WB
reg 6, base: 3584MB, range: 512MB, type UC
total RAM covered: 32752M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 32G num_reg: 7 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 32GB, type WB
reg 1, base: 3584MB, range: 512MB, type UC
reg 2, base: 32GB, range: 256MB, type WB
reg 3, base: 33024MB, range: 128MB, type WB
reg 4, base: 33152MB, range: 64MB, type WB
reg 5, base: 33216MB, range: 32MB, type WB
reg 6, base: 33248MB, range: 16MB, type WB
e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xdf800 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd7f0-0x000fd7ff] mapped at [ffff8800000fd7f0]
Base memory trampoline at [ffff880000097000] 97000 size 24576
BRK [0x03201000, 0x03201fff] PGTABLE
BRK [0x03202000, 0x03202fff] PGTABLE
BRK [0x03203000, 0x03203fff] PGTABLE
BRK [0x03204000, 0x03204fff] PGTABLE
BRK [0x03205000, 0x03205fff] PGTABLE
BRK [0x03206000, 0x03206fff] PGTABLE
BRK [0x03207000, 0x03207fff] PGTABLE
BRK [0x03208000, 0x03208fff] PGTABLE
BRK [0x03209000, 0x03209fff] PGTABLE
BRK [0x0320a000, 0x0320afff] PGTABLE
BRK [0x0320b000, 0x0320bfff] PGTABLE
BRK [0x0320c000, 0x0320cfff] PGTABLE
RAMDISK: [mem 0x3cb78000-0x3ebd4fff]
Early table checksum verification disabled
ACPI: RSDP 00000000dd9a9000 00024 (v02 ALASKA)
ACPI: XSDT 00000000dd9a9078 0006C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 00000000dd9b3588 0010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 00000000dd9a9178 0A40E (v02 ALASKA A M I 00000024 INTL 20051117)
ACPI: FACS 00000000dd9b7080 00040
ACPI: APIC 00000000dd9b3698 00092 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 00000000dd9b3730 00044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 00000000dd9b3778 0003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: SSDT 00000000dd9b37b8 0081B (v01 Intel_ AoacTabl 00001000 INTL 20091112)
ACPI: HPET 00000000dd9b3fd8 00038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT 00000000dd9b4010 0036D (v01 SataRe SataTabl 00001000 INTL 20091112)
ACPI: SSDT 00000000dd9b4380 009AA (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 00000000dd9b4d30 00B22 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000081effffff]
NODE_DATA(0) allocated [mem 0x81efbc000-0x81efe2fff]
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x81effffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009efff]
node 0: [mem 0x00100000-0xdd30afff]
node 0: [mem 0xdd88a000-0xdd915fff]
node 0: [mem 0xdedc7000-0xdedc7fff]
node 0: [mem 0xdee0b000-0xdf232fff]
node 0: [mem 0xdf7f4000-0xdf7fffff]
node 0: [mem 0x100000000-0x81effffff]
Initmem setup node 0 [mem 0x00001000-0x81effffff]
On node 0 totalpages: 8374122
DMA zone: 64 pages used for memmap
DMA zone: 25 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 14112 pages used for memmap
DMA32 zone: 903116 pages, LIFO batch:31
Normal zone: 116672 pages used for memmap
Normal zone: 7467008 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x96e6f000-0x96e6ffff]
PM: Registered nosave memory: [mem 0x96e7b000-0x96e7bfff]
PM: Registered nosave memory: [mem 0x96e7c000-0x96e7cfff]
PM: Registered nosave memory: [mem 0x96e9a000-0x96e9afff]
PM: Registered nosave memory: [mem 0xdd30b000-0xdd889fff]
PM: Registered nosave memory: [mem 0xdd916000-0xdd9b8fff]
PM: Registered nosave memory: [mem 0xdd9b9000-0xdedc6fff]
PM: Registered nosave memory: [mem 0xdedc8000-0xdee0afff]
PM: Registered nosave memory: [mem 0xdf233000-0xdf7f3fff]
PM: Registered nosave memory: [mem 0xdf800000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xdf800000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:5120 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 35 pages/cpu @ffff88081ec00000 s104600 r8192 d30568 u262144
pcpu-alloc: s104600 r8192 d30568 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8243249
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/vmlinuz-3.10.0-693.21.1.el7.x86_64 root=/dev/mapper/vg01-lv_root ro rd.lvm.lv=vg01/lv_usr rd.lvm.lv=vg01/lv_swap vconsole.font=latarcyrheb-sun16 rd.lvm.lv=vg01/lv_root vconsole.keymap=de rhgb quiet LANG=en_US.utf8
PID hash table entries: 4096 (order: 3, 32768 bytes)
x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
Memory: 5387312k/34062336k available (6940k kernel code, 565848k absent, 864732k reserved, 4560k data, 1792k init)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
x86/pti: Unmapping kernel while in userspace
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=5120 to nr_cpu_ids=8.
NR_IRQS:327936 nr_irqs:488 0
Console: colour dummy device 80x25
console [tty0] enabled
allocated 134217728 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3399.794 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6799.58 BogoMIPS (lpj=3399794)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Yama: becoming mindful.
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
Initializing cgroup subsys pids
Initializing cgroup subsys net_prio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 6
FEATURE SPEC_CTRL Not Present
FEATURE IBPB_SUPPORT Not Present
Spectre V2 : Vulnerable: Retpoline without IBPB
Freeing SMP alternatives: 24k freed
ACPI: Core revision 20130517
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 26646 entries in 105 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz (fam: 06, model: 2a, stepping: 07)
TSC deadline timer enabled
Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 OK
Brought up 8 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 8 processors activated (54396.70 BogoMIPS)
node 0 initialised, 6811109 pages in 116ms
devtmpfs: initialized
EVM: security.selinux
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xdd916000-0xdd9b8fff] (667648 bytes)
PM: Registering ACPI NVS region [mem 0xdedc8000-0xdee0afff] (274432 bytes)
atomic64 test passed for x86-64 platform with CX8 and with SSE
pinctrl core: initialized pinctrl subsystem
RTC time: 8:05:41, date: 05/10/18
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
PCI: Using configuration type 1 for base access
core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT ffff88081ee5a000 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT ffff88081ebaf800 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT ffff88081ee49800 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3e]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff window]
pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xf7f00000-0xf7f0ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf7f19000-0xf7f1900f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf7f17000-0xf7f173ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf7f10000-0xf7f13fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:244e] type 01 class 0x060401
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf7f16000-0xf7f163ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1e44] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1e02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057]
pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043]
pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf7f15000-0xf7f157ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf7f14000-0xf7f140ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
pci 0000:01:00.0: [1002:6798] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 0x18: [mem 0xf7e00000-0xf7e3ffff 64bit]
pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff]
pci 0000:01:00.0: reg 0x30: [mem 0xf7e40000-0xf7e5ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D1 D2 D3hot
pci 0000:01:00.1: [1002:aaa0] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xf7e60000-0xf7e63fff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf7e00000-0xf7efffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [io 0xd000-0xd0ff]
pci 0000:03:00.0: reg 0x18: [mem 0xf7d04000-0xf7d04fff 64bit pref]
pci 0000:03:00.0: reg 0x20: [mem 0xf7d00000-0xf7d03fff 64bit pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.1: bridge window [mem 0xf7d00000-0xf7dfffff]
pci 0000:04:00.0: [168c:0030] type 00 class 0x028000
pci 0000:04:00.0: reg 0x10: [mem 0xf7c00000-0xf7c1ffff 64bit]
pci 0000:04:00.0: reg 0x30: [mem 0xf7c20000-0xf7c2ffff pref]
pci 0000:04:00.0: supports D1
pci 0000:04:00.0: PME# supported from D0 D1 D3hot
pci 0000:04:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: PCI bridge to [bus 04]
pci 0000:00:1c.2: bridge window [mem 0xf7c00000-0xf7cfffff]
pci 0000:05:00.0: [1b21:1080] type 01 class 0x060400
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:05:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: PCI bridge to [bus 05-06] (subtractive decode)
pci 0000:00:1c.3: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:1c.3: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0xe0000000-0xfeafffff window] (subtractive decode)
pci 0000:05:00.0: PCI bridge to [bus 06]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: Enabled 4 GPEs in block 00 to 3F
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0x96e6f018-0x97ffffff]
e820: reserve RAM buffer [mem 0x96e7c018-0x97ffffff]
e820: reserve RAM buffer [mem 0xdd30b000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdd916000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdedc8000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdf233000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdf800000-0xdfffffff]
e820: reserve RAM buffer [mem 0x81f000000-0x81fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
amd_nb: Cannot enumerate AMD northbridges
Switched to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x0680-0x069f] has been reserved
system 00:01: [io 0x1000-0x100f] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0x0400-0x0453] could not be reserved
system 00:01: [io 0x0458-0x047f] has been reserved
system 00:01: [io 0x0500-0x057f] has been reserved
system 00:01: [io 0x164e-0x164f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x0454-0x0457] has been reserved
system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:04: [io 0x0a00-0x0a1f] has been reserved
system 00:04: [io 0x0a30-0x0a3f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: [dma 0 disabled]
pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:06: [io 0x04d0-0x04d1] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: [dma 3]
pnp 00:07: Plug and Play ACPI device, IDs PNP0400 (active)
system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:08: [mem 0xff000000-0xffffffff] has been reserved
system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 9 devices
ACPI: bus type PNP unregistered
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf7e00000-0xf7efffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.1: bridge window [mem 0xf7d00000-0xf7dfffff]
pci 0000:00:1c.2: PCI bridge to [bus 04]
pci 0000:00:1c.2: bridge window [mem 0xf7c00000-0xf7cfffff]
pci 0000:05:00.0: PCI bridge to [bus 06]
pci 0000:00:1c.3: PCI bridge to [bus 05-06]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfeafffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xf7e00000-0xf7efffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xf7d00000-0xf7dfffff]
pci_bus 0000:04: resource 1 [mem 0xf7c00000-0xf7cfffff]
pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:05: resource 7 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:05: resource 8 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:05: resource 9 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:05: resource 10 [mem 0xe0000000-0xfeafffff window]
NET: Registered protocol family 2
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP: reno registered
UDP hash table entries: 16384 (order: 7, 524288 bytes)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS mismatch (64 != 32), using 64 bytes
Unpacking initramfs...
Freeing initrd memory: 33140k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xcb470000-0xcf470000] (64MB) mapped at [ffff8800cb470000-ffff8800cf46ffff]
RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
RAPL PMU: hw unit of domain package 2^-16 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
sha1_ssse3: Using AVX optimized SHA-1 implementation
sha256_ssse3: Using AVX optimized SHA-256 implementation
futex hash table entries: 2048 (order: 5, 131072 bytes)
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1525939541.584:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 32768
Key type big_key registered
SELinux: Registering netfilter hooks
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xe0000000, mapped to 0xffffc90003600000, using 1200k, total 1200k
efifb: mode is 640x480x32, linelength=2560, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 80x30
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4.1 model 0x2A
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Requesting acpi_cpufreq
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
GHES: HEST is not enabled!
00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
rdac: device handler registered
hp_sw: device handler registered
emc: device handler registered
alua: device handler registered
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7f17000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.10.0-693.21.1.el7.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7f16000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.10.0-693.21.1.el7.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x0000b930
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
xhci_hcd 0000:00:14.0: irq 25 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.10.0-693.21.1.el7.x86_64 xhci-hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.10.0-693.21.1.el7.x86_64 xhci-hcd
usb usb4: SerialNumber: 0000:00:14.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
Intel P-state driver initializing.
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
NET: Registered protocol family 17
microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x29
microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x29
microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x29
microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x29
microcode: CPU4 sig=0x206a7, pf=0x2, revision=0x29
microcode: CPU5 sig=0x206a7, pf=0x2, revision=0x29
microcode: CPU6 sig=0x206a7, pf=0x2, revision=0x29
microcode: CPU7 sig=0x206a7, pf=0x2, revision=0x29
microcode: Microcode Update Driver: v2.01 , Peter Oruba
PM: Hibernation image not present or could not be loaded.
Loading compiled-in X.509 certificates
Loaded X.509 cert 'CentOS Linux kpatch signing key: ea0413152cde1d98ebdca3fe6f0230904c9ef717'
Loaded X.509 cert 'CentOS Linux Driver update signing key: 7f421ee0ab69461574bb358861dbe77762a4201b'
Loaded X.509 cert 'CentOS Linux kernel signing key: 03da6092f6711321b5ace12e845da97336f7674d'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
IMA: No TPM chip found, activating TPM-bypass!
Magic number: 2:105:68
memory memory229: hash matches
memory memory96: hash matches
rtc_cmos 00:02: setting system clock to 2018-05-10 08:05:41 UTC (1525939541)
Freeing unused kernel memory: 1792k freed
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Running in initial RAM disk.
systemd[1]: Set hostname to .
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Reached target Local File Systems.
systemd[1]: Starting Local File Systems.
systemd[1]: Reached target Swap.
systemd[1]: Starting Swap.
systemd[1]: Reached target Timers.
systemd[1]: Starting Timers.
systemd[1]: Created slice Root Slice.
systemd[1]: Starting Root Slice.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting udev Kernel Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting udev Control Socket.
systemd[1]: Created slice System Slice.
systemd[1]: Starting System Slice.
systemd[1]: Reached target Slices.
systemd[1]: Starting Slices.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Journal Socket.
systemd[1]: Reached target Sockets.
systemd[1]: Starting Sockets.
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Starting Journal Service...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Starting dracut cmdline hook...
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Started Apply Kernel Variables.
systemd[1]: Started Create Static Device Nodes in /dev.
systemd[1]: Started Journal Service.
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:03:00.0: irq 26 for MSI/MSI-X
r8169 0000:03:00.0 eth0: RTL8168evl/8111evl at 0xffffc90003148000, 44:8a:5b:88:cc:9e, XID 0c900880 IRQ 26
r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
usb 1-1: new high-speed USB device number 2 using ehci-pci
libata version 3.00 loaded.
usb 2-1: new high-speed USB device number 2 using ehci-pci
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 27 for MSI/MSI-X
[drm] Initialized
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3e impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: DUMMY
ata2: SATA max UDMA/133 abar m2048@0xf7f15000 port 0xf7f15180 irq 27
ata3: SATA max UDMA/133 abar m2048@0xf7f15000 port 0xf7f15200 irq 27
ata4: SATA max UDMA/133 abar m2048@0xf7f15000 port 0xf7f15280 irq 27
ata5: SATA max UDMA/133 abar m2048@0xf7f15000 port 0xf7f15300 irq 27
ata6: SATA max UDMA/133 abar m2048@0xf7f15000 port 0xf7f15380 irq 27
usb 3-4: new full-speed USB device number 2 using xhci_hcd
[drm] radeon kernel modesetting enabled.
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
CRAT table not found
Finished initializing topology ret=0
kfd kfd: Initialized module
checking generic (e0000000 12c000) vs hw (e0000000 10000000)
fb: conflicting fb hw usage radeondrmfb vs EFI VGA - removing generic driver
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (TAHITI 0x1002:0x6798 0x1682:0x3001 0x00).
[drm] register mmio base: 0xF7E00000
[drm] register mmio size: 262144
ATOM BIOS: TAHITI
[drm] Changing default dispclk from 500Mhz to 600Mhz
radeon 0000:01:00.0: VRAM: 3072M 0x0000000000000000 - 0x00000000BFFFFFFF (3072M used)
radeon 0000:01:00.0: GTT: 2048M 0x00000000C0000000 - 0x000000013FFFFFFF
[drm] Detected VRAM RAM=3072M, BAR=256M
[drm] RAM width 384bits DDR
[TTM] Zone kernel: Available graphics memory: 16444792 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 3072M of VRAM memory ready
[drm] radeon: 2048M of GTT memory ready.
[drm] Loading tahiti Microcode
[drm] Internal thermal controller with fan control
[drm] probing gen 2 caps for device 8086:101 = 2212d02/0
[drm] radeon: dpm initialized
[drm] Found VCE firmware/feedback version 50.0.1 / 17!
[drm] GART: num cpu pages 524288, num gpu pages 524288
[drm] probing gen 2 caps for device 8086:101 = 2212d02/0
[drm] PCIE gen 2 link speeds already enabled
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
[drm] PCIE GART of 2048M enabled (table at 0x00000000001D6000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x00000000c0000c00 and cpu addr 0xffff8800dcb39c00
radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x00000000c0000c04 and cpu addr 0xffff8800dcb39c04
radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x00000000c0000c08 and cpu addr 0xffff8800dcb39c08
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x00000000c0000c0c and cpu addr 0xffff8800dcb39c0c
radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x00000000c0000c10 and cpu addr 0xffff8800dcb39c10
radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffc90003a35a18
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
radeon 0000:01:00.0: fence driver on ring 6 use gpu addr 0x00000000c0000c18 and cpu addr 0xffff8800dcb39c18
radeon 0000:01:00.0: fence driver on ring 7 use gpu addr 0x00000000c0000c1c and cpu addr 0xffff8800dcb39c1c
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:00.0: radeon: MSI limited to 32-bit
radeon 0000:01:00.0: irq 28 for MSI/MSI-X
radeon 0000:01:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
usb 3-4: New USB device found, idVendor=051d, idProduct=0002
usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-4: Product: Back-UPS RS 900G FW:879.L4 .I USB FW:L4
usb 3-4: Manufacturer: American Power Conversion
usb 3-4: SerialNumber: 3B1305X17368
random: fast init done
hid-generic 0003:051D:0002.0001: hiddev0,hidraw0: USB HID v1.00 Device [American Power Conversion Back-UPS RS 900G FW:879.L4 .I USB FW:L4 ] on usb-0000:00:14.0-4/input0
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 1 succeeded in 1 usecs
[drm] ring test on 2 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 3 usecs
[drm] ring test on 4 succeeded in 3 usecs
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20130517/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT1._GTF] (Node ffff880174b40e88), AE_NOT_FOUND (20130517/psparse-536)
ata2.00: READ LOG DMA EXT failed, trying unqueued
ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
ata2.00: ATA-9: Samsung SSD 840 PRO Series, DXM05B0Q, max UDMA/133
ata2.00: 1000215216 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20130517/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT4._GTF] (Node ffff880174b56000), AE_NOT_FOUND (20130517/psparse-536)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20130517/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT3._GTF] (Node ffff880174b40f78), AE_NOT_FOUND (20130517/psparse-536)
ata4.00: ATAPI: ATAPI iHAS424 Y, ZL1U, max UDMA/100
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20130517/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT1._GTF] (Node ffff880174b40e88), AE_NOT_FOUND (20130517/psparse-536)
ata5.00: ATA-8: WDC WD1002FBYS-02A6B0, 03.00C06, max UDMA/133
ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
ata2.00: configured for UDMA/133
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
scsi 1:0:0:0: Direct-Access ATA Samsung SSD 840 5B0Q PQ: 0 ANSI: 5
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20130517/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT4._GTF] (Node ffff880174b56000), AE_NOT_FOUND (20130517/psparse-536)
ata5.00: configured for UDMA/133
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20130517/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT3._GTF] (Node ffff880174b40f78), AE_NOT_FOUND (20130517/psparse-536)
ata4.00: configured for UDMA/100
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20130517/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT5._GTF] (Node ffff880174b56078), AE_NOT_FOUND (20130517/psparse-536)
ata6.00: ATA-8: WDC WD10EARS-00Y5B1, 80.00A80, max UDMA/133
ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20130517/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT5._GTF] (Node ffff880174b56078), AE_NOT_FOUND (20130517/psparse-536)
ata6.00: configured for UDMA/133
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20130517/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT2._GTF] (Node ffff880174b40f00), AE_NOT_FOUND (20130517/psparse-536)
ata3.00: ATAPI: HL-DT-ST BD-RE BH10LS30, 1.00, max UDMA/133
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20130517/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT2._GTF] (Node ffff880174b40f00), AE_NOT_FOUND (20130517/psparse-536)
ata3.00: configured for UDMA/133
usb 1-1.4: new full-speed USB device number 3 using ehci-pci
usb 1-1.4: New USB device found, idVendor=045e, idProduct=0745
usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.4: Product: Microsoft® 2.4GHz Transceiver v7.0
usb 1-1.4: Manufacturer: Microsoft
[drm] ring test on 5 succeeded in 2 usecs
[drm] UVD initialized successfully.
input: Microsoft Microsoft® 2.4GHz Transceiver v7.0 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input2
hid-generic 0003:045E:0745.0002: input,hidraw1: USB HID v1.11 Keyboard [Microsoft Microsoft® 2.4GHz Transceiver v7.0] on usb-0000:00:1a.0-1.4/input0
input: Microsoft Microsoft® 2.4GHz Transceiver v7.0 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.1/input/input3
hid-generic 0003:045E:0745.0003: input,hidraw2: USB HID v1.11 Mouse [Microsoft Microsoft® 2.4GHz Transceiver v7.0] on usb-0000:00:1a.0-1.4/input1
[drm] ring test on 6 succeeded in 20 usecs
[drm] ring test on 7 succeeded in 5 usecs
[drm] VCE initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 1 succeeded in 0 usecs
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
input: Microsoft Microsoft® 2.4GHz Transceiver v7.0 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.2/input/input4
tsc: Refined TSC clocksource calibration: 3400.023 MHz
Switched to clocksource tsc
hid-generic 0003:045E:0745.0004: input,hiddev0,hidraw3: USB HID v1.11 Device [Microsoft Microsoft® 2.4GHz Transceiver v7.0] on usb-0000:00:1a.0-1.4/input2
scsi 2:0:0:0: CD-ROM HL-DT-ST BD-RE BH10LS30 1.00 PQ: 0 ANSI: 5
scsi 3:0:0:0: CD-ROM ATAPI iHAS424 Y ZL1U PQ: 0 ANSI: 5
scsi 4:0:0:0: Direct-Access ATA WDC WD1002FBYS-0 0C06 PQ: 0 ANSI: 5
scsi 5:0:0:0: Direct-Access ATA WDC WD10EARS-00Y 0A80 PQ: 0 ANSI: 5
ata2.00: Enabling discard_zeroes_data
sd 1:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/476 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata2.00: Enabling discard_zeroes_data
sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7
ata2.00: Enabling discard_zeroes_data
sd 1:0:0:0: [sda] Attached SCSI disk
sr 2:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
sr 3:0:0:0: [sr1] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
sr 3:0:0:0: Attached scsi CD-ROM sr1
sd 4:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 5:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 5:0:0:0: [sdc] Write Protect is off
sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: [sdb] Attached SCSI disk
sdc: sdc1 sdc2
sd 5:0:0:0: [sdc] Attached SCSI disk
[drm] ib test on ring 5 succeeded
[drm] ib test on ring 6 succeeded
[drm] ib test on ring 7 succeeded
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] DP-1
[drm] HPD5
[drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY2
[drm] Connector 1:
[drm] DP-2
[drm] HPD4
[drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY2
[drm] Connector 2:
[drm] HDMI-A-1
[drm] HPD6
[drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
[drm] Encoders:
[drm] DFP3: INTERNAL_UNIPHY1
[drm] Connector 3:
[drm] DVI-I-1
[drm] HPD3
[drm] DDC: 0x6580 0x6580 0x6584 0x6584 0x6588 0x6588 0x658c 0x658c
[drm] Encoders:
[drm] DFP4: INTERNAL_UNIPHY
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] Connector 4:
[drm] DVI-D-1
[drm] HPD1
[drm] DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c
[drm] Encoders:
[drm] DFP5: INTERNAL_UNIPHY1
[drm] fb mappable at 0xE05D8000
[drm] vram apper at 0xE0000000
[drm] size 8294400
[drm] fb depth is 24
[drm] pitch is 7680
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[drm] Initialized radeon 2.49.0 20080528 for 0000:01:00.0 on minor 0
random: crng init done
EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
systemd-journald[130]: Received SIGTERM from PID 1 (systemd).
SELinux: 2048 avtab hash slots, 106247 rules.
SELinux: 2048 avtab hash slots, 106247 rules.
SELinux: 8 users, 14 roles, 5000 types, 308 bools, 1 sens, 1024 cats
SELinux: 94 classes, 106247 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
type=1403 audit(1525939545.286:2): policy loaded auid=4294967295 ses=4294967295
systemd[1]: Successfully loaded SELinux policy in 214.907ms.
systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time.
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: Inserted module 'ip_tables'
systemd[1]: Relabelled /dev and /run in 22.428ms.
EXT4-fs (dm-2): re-mounted. Opts: (null)
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
EXT4-fs (dm-0): re-mounted. Opts: (null)
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
parport_pc 00:07: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 5 [PCSPP]
wmi: Mapper loaded
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
mei_me 0000:00:16.0: irq 29 for MSI/MSI-X
ACPI Warning: SystemIO range 0x000000000000f000-0x000000000000f01f conflicts with OpRegion 0x000000000000f000-0x000000000000f00f (\_SB_.PCI0.SBUS.SMBI) (20130517/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
sd 1:0:0:0: Attached scsi generic sg0 type 0
sr 2:0:0:0: Attached scsi generic sg1 type 5
sr 3:0:0:0: Attached scsi generic sg2 type 5
sd 4:0:0:0: Attached scsi generic sg3 type 0
sd 5:0:0:0: Attached scsi generic sg4 type 0
input: PC Speaker as /devices/platform/pcspkr/input/input5
snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
snd_hda_intel 0000:00:1b.0: irq 30 for MSI/MSI-X
snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
snd_hda_intel 0000:01:00.1: Force to non-snoop mode
AES CTR mode by8 optimization enabled
snd_hda_intel 0000:01:00.1: irq 31 for MSI/MSI-X
alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input6
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input7
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input8
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input9
input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10
input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
alg: No test for crc32 (crc32-pclmul)
ppdev: user-space parallel port driver
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
ath9k 0000:04:00.0: enabling device (0100 -> 0102)
Adding 4194300k swap on /dev/mapper/vg01-lv_swap. Priority:-1 extents:1 across:4194300k SSFS
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: RAPL package 0 domain package locked by BIOS
ath: EEPROM regdomain: 0x21
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: AU
ath: Regpair used: 0x21
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ieee80211 phy0: Atheros AR9300 Rev:3 mem=0xffffc90004540000, irq=18
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
FAT-fs (sda6): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
EXT4-fs (dm-7): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (dm-10): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (dm-9): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts: (null)
systemd-journald[608]: Received request to flush runtime journal from PID 1
EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
type=1305 audit(1525932349.272:3): audit_pid=1162 old=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 res=1
ip6_tables: (C) 2000-2006 Netfilter Core Team
Ebtables v2.0 registered
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
r8169 0000:03:00.0 enp3s0: link down
r8169 0000:03:00.0 enp3s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Netfilter messages via NETLINK v0.30.
ip_set: protocol 6
r8169 0000:03:00.0 enp3s0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
NFSD: starting 90-second grace period (net ffffffff81aeae40)
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered disabled state
device virbr0-nic entered promiscuous mode
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered listening state
IPv6: ADDRCONF(NETDEV_UP): virbr0: link is not ready
virbr0: port 1(virbr0-nic) entered disabled state
virbr1: port 1(virbr1-nic) entered blocking state
virbr1: port 1(virbr1-nic) entered disabled state
device virbr1-nic entered promiscuous mode
virbr1: port 1(virbr1-nic) entered blocking state
virbr1: port 1(virbr1-nic) entered listening state
IPv6: ADDRCONF(NETDEV_UP): virbr1: link is not ready
virbr1: port 1(virbr1-nic) entered disabled state
device-mapper: table: 253:14: thin: Couldn't open thin internal device
device-mapper: ioctl: error adding target to table
fuse init (API version 7.22)
usb 2-1.5: new high-speed USB device number 3 using ehci-pci
usb 2-1.5: New USB device found, idVendor=058f, idProduct=6387
usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.5: Product: Mass Storage Device
usb 2-1.5: Manufacturer: JetFlash
usb 2-1.5: SerialNumber: XI6IQRG0
usb-storage 2-1.5:1.0: USB Mass Storage device detected
scsi host6: usb-storage 2-1.5:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
scsi 6:0:0:0: Direct-Access JetFlash Transcend 16GB 8.07 PQ: 0 ANSI: 2
sd 6:0:0:0: Attached scsi generic sg5 type 0
sd 6:0:0:0: [sdd] 31375360 512-byte logical blocks: (16.0 GB/14.9 GiB)
sd 6:0:0:0: [sdd] Write Protect is off
sd 6:0:0:0: [sdd] Mode Sense: 03 00 00 00
sd 6:0:0:0: [sdd] No Caching mode page found
sd 6:0:0:0: [sdd] Assuming drive cache: write through
sdd:
sd 6:0:0:0: [sdd] Attached SCSI removable disk
FAT-fs (sdd): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
usb 1-1.3: new high-speed USB device number 4 using ehci-pci
usb 1-1.3: New USB device found, idVendor=04f9, idProduct=003d
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.3: Product: HL-4150CDN series
usb 1-1.3: Manufacturer: Brother
usb 1-1.3: SerialNumber: E68020H1J209538
usblp 1-1.3:1.0: usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04F9 pid 0x003D
usbcore: registered new interface driver usblp
usblp0: removed
usblp 1-1.3:1.0: usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04F9 pid 0x003D
usblp0: removed
usblp 1-1.3:1.0: usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04F9 pid 0x003D